ABS Seals:
(Enlarged illustrations can be found in our photo gallery, link below)
Designed for cold bonding with bitumen:
|
|
ABS EPDM
EPDM sealant collar designed for cold bonding.
For anchorage points with a diameter of ø16 and 42mm, finished off by a perfectly-fitting tube clamp.
Not suitable for welding !!!
Only for use on bitumen roofs!
|
Specially designed for BITUMEN:
|
|
ABS BITU
Sealant collar for bitumen roofs, with reduced PVC content, designed for anchorage points with a diameter of ø16 and 42mm. Incl. shrink tubing (standard: 100mm)
Surface: Sanded
Not suitable as the uppermost layer! Non-UV-resistant!
|
|
|
ABS BITU-S
Sealant collar for bitumen roofs, with reduced PVC content, designed for anchorage points with a diameter of ø16 and 42mm. Incl. shrink tubing (standard: 100mm)
Surface: Slated
|
Specially designed for synthetic roof materials
|
|
ABS PVC
Sealant collar for PVC (polyvinyl chloride) roofs, designed for anchorage points with a diameter of ø16 and 42mm. Incl. shrink tubing (standard: 100mm) - for implementation with systems supplied by the following manufacturers:
Sikaplan (Sika)
Thermofol (Bauder)
Rhenofol (FDT)
Alkor, Solvay (Wolfin)
Evalon (Alwitra)
Flagon (Flag)
Alkorplan F
|
|
|
ABS PP
Sealant collar for PP (polypropylene) roofs, designed for anchorage points with a diameter of ø16 and 42mm. ncl. shrink tubing (standard: 100mm) - for implementation with systems supplied by the following manufacturers:
Sarnafil (Sika)
Thermoplan, Thermofin (Bauder)
Rhepanol (FDT)
Vedafin (Vedag)
Inofin (Wolfin)
Flagon FPO (Flag)
Sucoflex
|
|
|
ABS PE
Sealant collar for bitumen roofs, with reduced PVC content, designed for anchorage points with a diameter of ø16 and 42mm. Incl. shrink tubing (standard: 100mm)
Polyfin
Spectraplan (Nebiprofa)
Extrupol (Schedetal)
|
Seal Extension
The seal extension was developed to extend the ABS BITU II seal for use, for example, with inverted roofs. The sealant shrink tubing is available for ABS supports with a diameter of 16 or 42 mm. Standard lengths: 300 - 600 - 1200 mm. A heat source (e.g. a hot-air gun) is required to shrink the tubing. For more information, please refer to the guide below.
|
|
ABS Seal Extension 16/100-1200
Sealant shrink tubing for the BITU II seal, can be used, for example, with inverted roofs, for Ø16mm anchorage points (e.g. ABS Lock III),
Dimensions: d = 33 mm, h = 300 mm
|
|
|
ABS Seal Extension 42/100-1200
Sealant shrink tubing for the BITU II seal, can be used, for example, with inverted roofs, for Ø42mm anchorage points (e.g. ABS Lock X-SR),
Dimensions: d = 52 mm, h = 300 mm
|
 |
|
 |
[Implementation of a collar coupled with a shrinking tube on a standard flat roof]
|
|
[Implementation of a collar coupled with an extended shrinking tube on an inverted roof]
|
PDF Download
To save the download files click on the link using the right mouse button: Save as...
