ABS-Lock® X
Fixed Stainless Steel Anchorage Point with Base Plate - Sandwich Panel
The ABS-Lock® X system was developed to provide a secure single anchorage point for individuals.
The system is licensed and CE-tested as an anchorage point in accordance with DIN EN 795, classes A, B and C as an end post for cabling systems. Being manufactured completely from stainless steel 1.4301 protects it from corrosion. The Lock X is available with various base plates suitable for a variety of surfaces so it can be used almost anywhere. The system is available in lengths of up to 1000 mm. If the Lock X is mounted as either an end or corner support of a cabling system then an additional supporting rod is used. In cabling systems where the supports need to have a height of 300 mm or more the Lock X/SR, consisting of a 42 mm stainless steel rod, is used.
 |
 |
||
 |
|||
Mounting Options |
|||
| Doweled / Cemented into concrete (at least B25) |
Clamped - mounted from above | Clamped to a beam, steel girder, lightweight concrete | Welded to a steel girder |
 |
 |
 |
 |
Screwed to a steel girder |
Screwed into wooden paneling, base plate with 28 bores (for 24mm paneling and upwards) |
Screwed into wooden rafters, no base plate |
Screwed into wooden rafters with topside paneling |
 |
 |
 |
 |
ABS-Lock X-SR - Reinforced Support
 |
The ABS-Lock X-SR is a reinforced variant of the ABS-Lock X. The Lock X-SR’s stainless steel rod is 42mm in diameter and welded to the base plate, thus providing a stable end and corner support for cabling systems, such as the ABS-Lock SYS systems. Its variable base plate means it can be mounted on a large number of different surfaces. Diagram below: ABS-Lock X-SR with expansion bolt mechanism for reinforced concrete suspended ceilings. |
||
 |
|||
Stainless Steel Anchorage Point for Trapezoidal/Sandwich Sheeting
| ABS-Lock X for trapezoidal sheeting |
ABS-Lock X for sandwich panels |
|
 |
 |
|
| Mounted directly on the trapezoidal sheeting | Mounted on a thermal insulation composite system using spacers | Mounted directly on a sandwich panel with the toggle bolt inserted into the cavity |
 |
 |
 |
Mounting to the trapezoidal sheeting or sandwich element is actually done using a special mounting kit consisting of 4 toggle bolts and sealant material. Each Lock X only takes between 5 to 10 minutes to mount as a result. |
||
Mounting is simply done by drilling a hole through the trapezoidal roof sheeting. The toggle bolt is then inserted into the hole and screwed tight. Integrated rubber seals ensure that the hole is watertight and that the Lock X is thermally isolated.
The Lock X is designed to buckle under the stress of a fall to absorb the ensuing bulk of the force and is licensed for materials with as little as 0.5 mm thickness.
ABS-Lock® Images
PDF Download
To save the download files click on the link using the right mouse button: Save as...
