ABS-Lock® DH04 -
Anchorage Point for Pitched Roofs. Permanent anchorage point designed as an individually adjustable universal support for simultaneous use by 3 individuals
Contrary to commercially available roof hooks compliant with EN 517, class A (=only licensed for pull in the direction of the eaves), the ABS-Lock® DH04 has been specifically tested in accordance with EN 517, class B (=for all directions of load - including the verge and the apex!!), as well as EN 795, classes A+B.
Features |
The device is supplied with mounting accessories, i.e. two screws which may vary depending on the type and properties of the substructure. These screws are also made of stainless steel. |
Implementation & Installation
The straight ABS-Lock® DH04 model is implemented, for example, on slate roofs with paneling throughout. The device is installed by screwing two special screws through the paneling directly into the rafters. The cranked model is bent to allow installation on all common tiled roofs. This device is installed in the same way by screwing two special screws through the counter-battening into the rafters.
Lock DH04 Images
PDF Download
To save the download files click on the link using the right mouse button: Save as...
Specifications:
- ABS-Lock® DH04 roof safety hook
- Manufactured completely from 1.4301 material (stainless steel)
- Licensed and tested in accordance with EN 795, types A and B, and EN 517, type B, by the certified DEKRA test institute
- Max. number of individuals: 3
- Minimum rafter bore depth: 100mm
- Rafter dimensions: min. 6x12cm
- The device is always fixed to the rafters, bridging paneling, counter battens etc. with long screws.
The ABS-Lock® DH04, when coupled with a lanyard with force absorber and rope shortener - or a temporarily installed fall protection cabling system - is ideal for working in any direction.
